微量Zr对不对称轧制Al-0.8Mg-0.9Si合金板织构及性能的影响

本文研究了微量Zr对不对称轧制Al-0.8Mg-0.9Si合金板及其相继固溶处理后的微观结构及性能的影响。结果表明：微量Zr在Al-0.8Mg-0.9Si合金中形成Al3Zr相弥散分布在基体中,在不对称轧制过程中,该化合物相对Copper{112}<111>、Brass{011}<211>、S{123}<634>、E{111}<110>和F{111}<112>等形变织构无明显影响；在随后的固溶处理过程中,轧制板材发生的再结晶使得Copper、Brass、S等形变织构的取向密度降低,但不溶的细小Al3Zr相在一定程度上抑制了不连续再结晶行为,反而使轧制过程中形成的E、F剪切织构的取向密度增加。添加微量Zr所形成的上述结构使该合金板材在固溶后获得较好的综合性能,其抗拉强度、屈强比和延伸率分别可达230MPa、0.49和9.5%以上；塑性应变比r值从0.7提高至0.84,杯突值IE由8.94提高至9.84,各向异性度|Δr|由0.15降低至0.04。     

某企业不同工种的放射工作人员发生甲状腺结节风险分析

采用职业健康体检资料和问卷形式,利用单因素和多因素logistic回归模型,分析探讨某企业内不同工种的放射工作人员暴露在低剂量电离辐射环境下发生甲状腺结节的风险。结果表明,放射工作人员中以混合射线组甲状腺结节发生风险最高,随着年龄和放射工龄的增加发生风险会增加;性别不同与甲状腺结节发生风险有关。     

电感耦合等离子体原子发射光谱法测定辛酸铑催化剂中铂钯铅铁铜铝镍

准确测定辛酸铑催化剂中杂质元素含量,是判定产品是否合格的重要指标之一。以往常采用直流电弧发射光谱法(摄谱法)进行检测,但测定周期长,且重复性较差。用电感耦合等离子体原子发射光谱法(ICP-AES)测定辛酸铑催化剂中微量杂质元素时,辛酸铑催化剂样品中含有的大量有机组分和铑基体会对测定有严重干扰。实验采用反复滴加硝酸消解样品中有机组分,再用王水溶解盐类,选用合适背景点扣除的方式消除铑基体的干扰,建立了使用ICP-AES测定辛酸铑催化剂中0.001%~0.1%(质量分数)Pt、Pd、Pb、Fe、Cu、Al、Ni等7种微量杂质元素的方法。各元素在0.10~10.00μg/mL范围内与其发射强度呈线性关系,相关系数均大于0.9999;方法检出限(μg/mL)为0.075(Pt)、0.0033(Pd)、0.015(Pb)、0.0036(Fe)、0.010(Cu)、0.001(Al)、0.012(Ni)。实验方法用于测定辛酸铑催化剂样品中Pt、Pd、Pb、Fe、Cu、Al、Ni,结果的相对标准偏差为(RSD,n=7)为1.4%~9.6%。按照实验方法测定辛酸铑催化剂中Pt、Pd、Pb、Fe、Cu、Al、Ni,并与直流电弧发射光谱法的测定结果进行比对,结果相一致。     

Corrosion protection of aluminum alloy by epoxy coatings containing polyaniline modified graphene additives

In the study, polyaniline/reduced‐graphene oxide (PANI‐RGO) composites, fabricated by loading 2, 5, and 8wt% graphene oxide, was prepared by in‐situ emulsion polymerization and reduction. They are characterized by Fourier transform infrared spectroscopy, X‐ray diffraction, and scanning electron microscopy. Epoxy coatings adding PANI and PANI‐RGO composites were coated on the surface of AA5083 Al alloy. The anticorrosion performance of the coatings is measured by electrochemical impedance spectroscopy and potentiodynamic polarization curve in 3.5wt% NaCl solution. The results demonstrate that the epoxy/PANI‐RGO coating exhibits a better protection against AA5083 alloy corrosion compared with the epoxy/PANI coating. Enhancement of the passivation performance of PANI was obtained by the addition of RGO into epoxy/PANI coating system.     

Development of microbially influenced corrosion on carbon steel in a simulated water injection system

Microbially influenced corrosion (MIC) on internal pipeline surfaces has become a severe problem during the water injection process in secondary oil recovery. The formation of a biofilm, normally dominated by sulfate‐reducing bacteria (SRB), is believed to be the critical step of the MIC process. A continuously fed biofilm simulating the water injection process was operated to investigate the influence of biofilm development on MIC behavior in the early phase of corrosion development. The development of the corrosion product film and biofilm was monitored for 5 months with electrochemical impedance spectroscopy, linear polarization resistance, scanning electron microscopy, 3D optical profiling, and direct weight measurement. MIC development was found to comprise three phases: initialization, transition, and stabilization. The initialization phase involved the formation of the corrosion product layer and the initial attachment of the sessile microbes on metal surface. In the transition phase, the MIC process gradually shifted from charge‐transfer‐controlled reaction to diffusion‐controlled reaction. The stabilization phase featured mature and compact biofilm on the metal surface, and the general corrosion rate (CR) decreased due to the diffusional effect, while the pitting CR was enhanced at a lower carbon source level, which supported the mechanism of direct electron uptake from the metal surface by SRB.     

基于区块链技术的公益时间银行系统

在现有的时间银行系统中，时间币的发行功能和结算功能完全集中到一个中心节点上。这种极度中心化的功能结构，不仅存在容易发生中心节点单点失效、数据容易被篡改等信息安全问题，还存在着时间币的发行和流通缺乏透明度以及时间币的结算依赖中心化的结算机构等问题。针对这些问题，提出了一种基于区块链技术的解决方法。首先，将时间币的发行功能和结算功能从中心节点上分离出来；然后，利用具有分布式去中心化、集体维护和不可篡改等特性的区块链技术，将分离出来的发行功能逐步去中心化，将分离出来的结算功能去中心化，形成公益时间链（PWTB）；最终，PWTB利用区块链技术以去中心化的方式将时间银行系统由单个节点维护账本变成由集体维护一个分布式的共享账本，使时间币的发行和流通公开透明，时间币的结算不依赖某个中心化的节点。安全分析表明所设计的PWTB能够实现安全的信息传输与存储，以及数据的共享。     

露天矿导航系统总体架构设计与关键技术研究

针对露天矿道路网空间复杂、设备盲区较大、能见度较低存在的迷路、走错路的问题，设计了由数据访问层、业务逻辑层、接口层、应用层构成的系统总体架构。数据访问层确定了由点、路段、区域、路径组成的道路网数据结构与类结构，在运行于服务端的业务逻辑层设计并开发了导航路径规划、路网匹配、运行距离与时间预测、路口转向提示等通用算法，应用层通过接口调用通用算法实现了终端应用功能。基于系统总体架构，定义了道路网结构，采用面向对象技术设计了道路网类的数据结构，对于业务逻辑层的关键算法进行了研究，再对算法进行了接口封装，最后以华能集团伊敏露天矿的道路网数据为基础，分为独立导航、百度地图导航两部分开发了系统。研究表明：系统总体架构的设计使得系统具有较强的通用性、实用性、扩展性；系统实现了导航路径规划、定位点修正与路段匹配、到达目的地的运行距离与行程时间预测、路口转向提示等功能，解决了驾驶员迷路、走错路的问题；系统既可独立运行，也可与百度地图API等有效衔接，可适应多种终端。     

Experimental investigation of different morphology textured ceramic tools by in-situ formed for the dry cutting

Surface texture is considered an important measure to improve the cutting performance of a tool. In this study, we have prepared three types of textured and conventional tools on the rake face by an in-situ formed method. During the experiment, the best parameters of three types of textured tools were selected for dry cutting AISI 1045 steel at different cutting speeds. Cutting forces, cutting temperatures, workpiece surface roughness, and tool wear were measured during the cutting process. The results showed that textured tools have significantly reduced cutting force, cutting temperature, and tool wear, and the roughness of the workpiece was improved compared with the conventional tool. The micro-pit texture tool has less stress contact region than the micro-groove width texture tool, but the micro-groove width texture tool exhibiting the best cutting performance. This investigation clearly showed that the textured tool prepared by the in-situ formed method has improved cutting performance.     

白炭黑粒子间距对天然橡胶复合材料性能的影响

分别采用不同分子链长度的改性剂乙二醇二缩水甘油醚、丁二醇二缩水甘油醚、己二醇二缩水甘油醚和聚乙二醇二缩水甘油醚(PEGDGE)对白炭黑进行隔离改性,研究改性白炭黑对天然橡胶(NR)复合材料性能的影响。结果表明:与未改性白炭黑填充的NR复合材料相比,改性白炭黑填充的NR复合材料的t10和t90缩短,FL和储能模量(G′)减小,硬度降低,拉伸强度、拉断伸长率和撕裂强度提高;当改性剂为PEGDGE(回转半径为1.11 nm)时,改性白炭黑的粒子间距最大,分散性最好,NR复合材料的交联密度最大,G′和损耗因子最小,物理性能最佳。     

TLCD基础隔震框架结构的减振控制研究

为了避免和减轻由过大隔震层位移引起的损害,对基础隔震框架结构装设调频液柱阻尼器(tuned liquid column damper,简称TLCD)后混合系统的减振效果进行研究。建立了单层和多层混合控制系统在地震作用下的运动方程,采用TLCD-结构体系转化为调频质量阻尼器(tuned mass damper,简称TMD)-结构体系的等效方法,利用TMD参数优化公式,得到单个TLCD初始设计参数,并采用状态空间方程得到多个TLCD最优设计参数。通过对某8层基础隔震结构进行模拟,证明了该理论设计方法的合理性。该混合结构不仅可以减小隔震层位移和加速度,而且对上部结构位移和加速度反应都能更有效的控制。